Fix Your Squeaky Windshield Wiper With These Surprising Steps

Windshield wipers can make all the difference when you are driving in poor weather conditions. They will help keep your windshield clean and safe, but unfortunately, they can also be a source of frustration when they start to squeak and become difficult to operate. Here are some ways that you can fix your squeaky wiper blades.

How To Fix Squeaky Windshield Wipers

There's nothing quite like the sound of a squeaky windshield wiper to ruin a peaceful drive. You can't think of the importance of a windshield without considering the wiper. Although windshield wipers are relatively inexpensive, you should try these solutions to save money. Luckily, there are a few simple ways to stop your wipers from making that annoying noise. So squelch that squeak and enjoy the silence!

1. Locate the source of the noise

Squeaky windshield wipers are the bane of every driver's existence. That annoying sound can stop you from enjoying your favorite song on the radio and can even make it difficult to concentrate on the road. First, locate the source of the noise by turning on your wipers and listening for the squeak. It's likely coming from either the blades or the windshield wipers. If it's the wiper blades, you can try cleaning them. You can clean the wiper blades with soapy water, vinegar, or rubbing alcohol. If that doesn't work, you may need to replace them, especially if they are cracked or damaged.

2. Spray a lubricant on the wiper blades and wipe it off

After checking the condition of your wiper blades. Once you have located the source of the squeak, take a few minutes to try cleaning them with a microfiber cloth soaked in ammonia free glass cleaner. You can also clean the blades with a cloth or microfiber towel soaked in the windshield wiper fluid. If the blades are still not moving smoothly, you may need to lubricate them with a silicone-based lubricant. Try lubricating them with WD-40 or a similar product to stop windshield wipers from making noisemakers.

3. Try tightening the screws on the wiper arm

If you're driving down the road and your windshield wipers start making an annoying squeaking sound, it might be time to check the screws. That's right - the wiper assembly is held together by screws, and if they're loose, it can cause the wipers to squeak. Simply tighten the screws on the wiper arm assembly, and you'll stop windshield wipers squeak for good.

The wiper assembly is made up of two main parts: the wiper arm and blade. The wiper arms are attached to the wiper motor, and it's responsible for moving the blade back and forth across the windshield. The wiper blade is made of rubber, and it's what actually makes contact with the glass. Over time, the blade can become worn or damaged, causing streaks or smears on the windshield. In some cases, wiper blades may even tear, causing damage to the windshield itself. For this reason, it is important to inspect wiper blades regularly and replace them when necessary.

4. Bend or adjust the metal tabs on the wiper blade

If the squeaking problem persists, it's time to check if the metal tabs on the blade are in the right position. All you have to do is bend or adjust the metal tabs. Although this may sound like a daunting task, it's actually quite easy to do. Simply locate the squeaky spot and gently bend the tab in the opposite direction. You may add a bit of wiper fluid to the blades to help lubricate them and reduce the squeaking. Remember, squeaky wipers are not only annoying, but they can also be distracting. So, make sure to take care of the problem as soon as possible.

5. Replace the old wipers with new ones

Cracked blades can cause damage to your windshield glass. They may also reduce the visibility while you're driving, which can be extremely dangerous. If your blades are cracked or damaged, it's time to replace them with new ones. You should also consider replacing them if they're more than a year old.

Note that a dirty windshield can also cause squeaky noise. Imagine there are particles of debris (stone) on your windscreen, and the wiper swipes across the glass. It will surely result in noise and is could cause scratched or cracked glass. So, be sure to clean the entire windshield glass surface.

Conclusion

There you have it - five simple ways to fix your squeaky wiper blades. Just remember to take action as soon as possible to avoid any damage to your windshield. And if your windshield is already cracked, you should get that replaced or repaired, depending on the type of crack. But which reliable automobile company can you trust? Find out below.

About Windscreen And Tint Blacktown

Driving in the rain can be a drag, but it's even worse when your windshield starts to fog up. Not only is driving in the rain dangerous, but it's also incredibly frustrating when you can't see out of your windshield.

Windscreen And Tint Blacktown can help! We offer quick and easy windshield repair and replacement, as well as high-quality glass tinting services. Plus, we carry top-brand wiper blades to keep your view clear no matter what the weather throws at you. Visit our site for all the amazing benefits of hiring Windscreen and Tint Blacktown.